Activated By Water
- Remove lantern section by pressing in both release latches & lifting off.
- Remove fill plug by turning 90° counterclockwise and lifting out.
- Using an 8% solution of salt water, fill both internal chambers equally, just to the bottom of the circular cutout in the central divider.
- Replace fill plug and clean surface and contacts thoroughly with plain water. Press lantern section straight down until lock latches are fully engaged.
The HYDRACELL™ Cube Lantern provides indoor and outdoor light via the lantern function, the Accessory Light, and other ancillary lighting products.
It can charge mobile phones and power devices in off grid locations or in emergencies such a power outages. The Cube Lantern has a standard USB out port for charging and a 2.6 mm DC out port for powering a variety of small devices including the Accessory Light.
The oxygen fuel cell generates power using two easily replaced anode plates.